Power & Pantry

Home / EMP corner / Faraday cage vs faraday bag?

Faraday cage vs faraday bag: what's the difference? (2026)

By Power and Pantry. Guidance documents, maker specifications, and prices checked November 2026.

Disclosure: Power and Pantry is reader supported. If a link on this page earns a commission in the future, it will be marked, and it never changes a comparison. The verdicts here follow government guidance documents, the makers' own published specifications, and arithmetic, not commissions.

Short answer. There is one invention here, not two. A faraday cage is a closed shell of conductive material that keeps electric fields and radio waves off whatever sits inside it, and a faraday bag is that same shell made flexible, from conductive fabric instead of rigid metal. The word "cage" is the older and larger one: in the US government's own protection documents, "Faraday cage" names a rigid equipment enclosure, and the scale runs from cabinets and racks up through shelters to shielded rooms and buildings. A bag is the bottom rung of that same ladder, not a different technology and not a weaker category of it. What actually changes as you climb is size, structure, and how the openings and cable entries are engineered, and the price moves faster than the shielding does: one maker sells a $23 phone pouch, a $299 duffel, and a walk-in tent starting at $20,990, all built from the same shielding fabric and all carrying the same stated attenuation figure. Neither a cage nor a bag needs a ground wire to shield, whatever the product pages imply. That myth gets its own section below.

How to read this page. This is the companion to our faraday bag page, which carries the lab numbers, the test standards, and the government's household advice in full. This page answers the comparison question: cage versus bag, what each word means, what each form actually protects, and where the money goes. Figures are labeled with whose they are. Nothing here is presented as tested by us, because none of it was.

One invention, two sizes

The cage came first, and it was room-sized. In 1836, Michael Faraday lined a room with metal foil, stood inside it, and let high-voltage discharges from an electrostatic generator strike the outside; his electroscope showed no charge inside the room's walls or volume, and the charge stayed on the exterior surface. Every shielded enclosure since, foil-lined room, steel cabinet, fabric pouch, is that experiment at a different scale. The physics does not change with the size. A field reaching the shell drives currents in the conductive layer, the currents cancel the field inside, and the contents sit in the quiet space the shell creates, provided the shell is continuous. Our bag page works through that mechanism and the decibel scale in detail; this page takes both as established and compares the forms.

The government's usage shows where the word "cage" lives now. The Department of Homeland Security's shielding best-practices document for mission-critical equipment (Science and Technology Directorate and CISA, August 2022) lays out three protection approaches in order of complexity: equipment enclosures, shelters, and rooms or buildings. Its first option reads: portions of equipment "can be protected through placement inside a small, shielded cabinet or enclosure called a Faraday cage," with a shielded server rack as the pictured example. Its second option is the shelter, shipping-container scale; FEMA's broadcast-continuity program runs 77 such shelter installations nationwide. Its third is the shielded room or building, built of metallic shielding or conductive concrete, which the document calls the most complicated of the three to implement. In professional usage, then, "faraday cage" means the rigid enclosure you bolt down or build, at cabinet scale and up. Nobody in those documents calls a pouch a cage, and nobody calls a room a bag. The words mark the ends of one scale.

The same fabric, the whole price ladder

The cleanest way to see that the difference is scale rather than technology is to stay inside one maker's catalog. MOS Equipment sells the Mission Darkness line, and every product below is built from its TitanRF Faraday Fabric, a copper and nickel composite weave, with the maker naming the same two test standards, MIL-STD-188-125 and IEEE 299-2006, behind the line. Prices are from the maker's own store, checked November 2026.

FormWhat it isSizePrice at the maker's store, November 2026
Faraday bag (Mission Darkness Non-Window Faraday Bag for Phones)Two layers of TitanRF fabric, double roll and Velcro closure. The subject of our bag page, where its published lab results are printed in full.8.5 by 5 inch interior; one phone or key fob$23, shown as a sale price when checked
Large faraday bag (Mission Darkness X2 Faraday Duffel)Two layers of TitanRF fabric in a ballistic nylon duffel, magnetic roll-top closure. The maker lists small generators and power stations among what fits the main cavity.23 by 10 by 10 inch interior; laptops, radios, a small power station$299, in stock when checked
Faraday tent (Mission Darkness CYPHERCYLENT Faraday Tent)A walk-in shielded room: the same TitanRF fabric hung as a continuous shell inside a carbon fiber frame, with a magnetic-seal door, filtered connection panels, and shielded ventilation. Built to order.6 by 6 by 7 foot interior, 252 cubic feet; one to two people working insideStarting at $20,990

Now the arithmetic the table invites. The tent costs about 913 times the phone bag (20,990 divided by 23), and about 70 times the duffel. The maker's stated attenuation for the tent is 80+ dB, the same figure its published lab results support for the bags. The extra money is not buying a higher decibel number. It is buying the frame that holds 252 cubic feet of fabric in the shape of a room, a door that seals magnetically across a person-sized opening, honeycomb vents that move air without opening a signal path, and filter plates that pass power, ethernet, and USB through the wall, in the maker's words, "without leakage." Scale is the product. The shielding is the same cloth.

The maker's own copy makes the same point from the other direction. Its tent page asks why build a permanent shielded room when a deployable enclosure "reaches the same 80+ dB isolation," and its installation notes treat the tent as equipment: assemble it indoors, leave it standing, test the door seal after assembly. A cage, in the catalog of the company that sells both, is what a bag becomes when you need to stand inside it and work.

Placeholder: matched offers

When this site's affiliate programs are approved, this block will show the phone bag and the duffel from this page, with dated prices. The tent is listed for scale, not as a household recommendation.

No affiliate links are live on this page yet, and nothing here is a product endorsement.

Where the two forms actually differ

What fits, and whether anything can run inside. A bag protects small, switched-off, unplugged things, and protects them only while they stay sealed in. The moment a cable crosses the closure, the shell is open; the bag maker prints that failure mode on its own product page, as our bag page records. A cage at shelter or room scale is built for the opposite job: equipment that stays installed, powered, and connected. That is possible only because every entry is engineered, which is the next difference.

Penetrations are the whole engineering problem at cage scale. The DHS best-practices document gives them a name, points of entry (POE), and a flat rule: "All POEs must be protected." Its list of protections is shielded cables and conduit, waveguides beyond cutoff, conductive gaskets and spring fingers, filters, and nonlinear protection devices. Personnel doors get knife-edge gaskets, and the most stringent designs get double-door vestibules so the shield is never open to the outside. Air ducts follow the waveguide rule; plumbing uses metal pipes; power lines get EMP-rated surge protectors and filters at the entry. Read that list against a bag and the bag's simplicity explains itself: a bag has exactly one penetration, its closure, and the rule for it is simply to keep it shut. A cage has a door people walk through, power, data, air, and sometimes water crossing its walls, and each crossing is a place the shield can fail. The price ladder in the table above is, in large part, the cost of engineering those crossings.

Verification and upkeep. A bag's upkeep is a phone call: seal a phone inside, ring it, and a bag that no longer blocks has told you so, which is the test our bag page describes. A cage's upkeep is a program. The DHS document calls for inspections of the shielding and its points of entry before deployment, annually, and whenever the configuration changes, under a written hardness maintenance plan, and it notes that putting equipment in one shelter or room instead of many separate enclosures is generally preferable precisely because fewer penetrations mean fewer inspections. Nobody inspects a pouch annually. The difference is not rigor; it is that a cage is infrastructure and a bag is a container.

What neither form does. Both protect only what is inside the shell, at the moment of the event. Neither protects the grid, the network, or anything left outside and plugged in, and neither has been tested against an actual EMP waveform in any test a consumer can read; the evidence on both sides is shielding measurements against steady radio signals, as our bag page sets out. A bigger shell widens what fits inside the protection. It does not widen what protection means.

The grounding myth

The most durable claim in this category is that a faraday cage has to be grounded to work, and that a bag, being ungrounded, is somehow the lesser device. It is wrong in a way the documents make easy to check. Shielding by enclosure works because the closed shell carries the induced currents on its own surface; no path to earth is part of the mechanism, and a floating enclosure shields. That is why the original demonstration worked on a foil-lined room and why a phone goes dark in a pouch held in your hand.

Grounding does appear in the government documents, and where it appears is the tell. In the 2019 EMP Protection and Resilience Guidelines (National Coordinating Center for Communications, published through CISA), the grounding instruction sits in the communications-site material: grounding should comply with the R56 site standard the guidelines cite, and antenna-line shields should be grounded per that standard. It is advice about sites, towers, and connected systems. The same document's household-level advice, wrap spare electronics in foil or put them in Faraday containers, carries no grounding step. In the 2022 best-practices document, grounding appears at the penetrations: metal plumbing grounded at both ends, surge protectors and filters where power lines enter. That is conducted-energy management, giving energy arriving on wires somewhere to go. It is a real job, and it belongs to wires and buildings, not to the shield itself.

The maker's tent makes the same point by omission and by warning. Its published installation and safety notes cover the frame, gloves for handling the fabric, the door-seal test, and a floor mat, and include no earth connection step for the enclosure; its safety warning runs the other way, that the conductive fabric is flammable and must be kept away from outlets, plugs, and cables. A product page that tells you a pouch or a can needs a ground rod before it shields is adding a ritual the physics and the guidance documents do not ask for. If your enclosure has power run into it, that power entry needs the filter and surge treatment the DHS document describes, and an electrician, not a ground wire tied to the bag.

Which one a household actually needs

For the household job that brings most readers here, storing a small kit of spare electronics against a possible pulse, the government's own ranking, quoted on our bag page, puts Faraday cages "of secondary importance" for handheld devices, because small electronics without cables are relatively resilient and their supporting infrastructure is the weak point. The recommended container for spares is modest: foil wrap or a Faraday container giving at least 20 dB of protection. A bag covers that job for $23, a foil wrap for less, and nesting one inside the other, or a bag inside a well-sealed metal can, follows the guidelines' own two-layer logic and costs little. Nothing about the job improves at $299, and nothing about it requires a room.

The cage earns its price in the jobs it was designed for: a lab that must examine a phone while it stays shielded and powered, through filtered ports and conductive gloves; a broadcast shelter that must keep transmitting after an event, with its generator, fuel controls, and crew inside the barrier; a control room that cannot go dark. Those are attended, connected, working systems, and the DHS document's three options exist for them. If a seller aims that price class at a household's drawer of spares, the mismatch is the finding. Buy the size of shell your kit fits in, seal it properly, test it with a phone, and let the difference between a cage and a bag go back to being what it is: a difference in size, not in kind.

Questions people actually ask

Is a faraday bag just a small faraday cage?

Yes. Same principle, same requirement of a continuous conductive shell, different material and scale. The bag is the flexible form; the cage is the rigid form, and in government and professional usage the word cage usually means the rigid enclosure at cabinet size or larger. A well-sealed bag outperforms a badly sealed rigid box, because the shell's continuity, not its stiffness, is what shields.

Does a faraday cage need to be grounded?

No, and neither does a bag. Grounding in the government guidance belongs to communication sites, antenna lines, plumbing, and power entries, where conducted energy needs managing. The enclosure's shielding does not use an earth connection, and the household advice in the same guidelines, foil or a container for spares, has no grounding step. The section above works through the documents.

Is a cage stronger than a bag?

Not by category. Within the one maker's line checked for this page, the walk-in tent and the $23 pouch carry the same stated attenuation figure, 80+ dB, on the same fabric. What the cage adds is volume, a door, engineered penetrations, and a maintenance program, not a higher shielding number. A metal trash can, the most common homemade cage, is the standing counterexample: the government's guidelines say it does not usually provide reliable protection unless its lid, handle, and base gaps are sealed, which our bag page covers.

Can I turn a room or a metal building into a faraday cage?

That is the DHS document's third option, and it describes it as a construction discipline, not a lining project: metallic or conductive-concrete shielding, every point of entry protected, personnel doors gasketed or vestibules doubled, and inspections before deployment, annually, and at every configuration change. No verified do-it-yourself cost or attenuation figure exists in the sources for this page, so none is printed. A metal building as it stands, with its door seams, vents, and wiring penetrations untreated, has no published shielding figure behind it, and the phone test can tell you about signal leakage today but proves nothing about a pulse.

Does putting a bag inside a can, or nesting enclosures, help?

Layering is the government's own household advice in another form: its foil recommendation is two or more complete layers with overlapped seams. A second independent shell adds margin against a leak in the first, for signal blocking and by the same continuity logic. What nesting does not add is a test: no combination of consumer enclosures has been exposed to an EMP waveform in a published test, and the honest claim stays the one on our bag page, that the shielding is measured, the pulse protection is inferred.

Data basis for this page: Electromagnetic Pulse (EMP) Shielding Mitigations: Best Practices for Protection of Mission Critical Equipment, US Department of Homeland Security, Science and Technology Directorate and CISA, August 2022 (the three protection approaches, the equipment enclosure "called a Faraday cage," the 77 FEMA IPAWS shelter installations, the points-of-entry rule and its protection list, and the inspection cadence of before deployment, annually, and on configuration change); the Electromagnetic Pulse (EMP) Protection and Resilience Guidelines for Critical Infrastructure and Equipment, Version 2.2, February 5, 2019, developed by the National Coordinating Center for Communications and published through CISA (the placement of grounding in the site and antenna material, the foil and container advice for spares, and the protection levels), as read in full for our faraday bag page; MOS Equipment's Mission Darkness store pages, checked November 2026 (the X2 Faraday Duffel at $299 with its 23 by 10 by 10 inch interior and power-station fit, the CYPHERCYLENT Faraday Tent starting at $20,990 with its 6 by 6 by 7 foot interior, 80+ dB stated attenuation, TitanRF fabric, filtered connection panels, shielded ventilation, and installation and safety notes, and the phone bag at $23 from the bag page's check); and the standard published account of Faraday's 1836 foil-lined room demonstration. Prices and product pages will drift; the distinction between a container and a building will not.